Filtered SCR DC Basic Speed Control (open chassis)

Filtered SCR DC Basic Speed Control (open chassis)
Standard Features
  • Operates off 115 Volt AC line.
  • Filtered DC output for cooler motor operation, longer brush life, lower audible noise, and wider speed range.
  • Dip switches to easily calibrate control for different motor sizes.
  • Line voltage and temperature compensation minimize speed drift.
  • Trim pots on PC board to adjust torque limit, minimum speed limit, maximum speed limit, acceleration time, and speed regulation.
  • Back EMF feedback maintains better than 2% speed regulation.
  • 10k ohm remote speed pot and 24' connecting wire supplied with each control.
  • Connections for optional user-supplied inhibit switch.
  • Terminal block for quick line and motor connection.
  • Plug-in connector for speed pot and optional usersupplied inhibit switch.
  • Flexibility in adding plug-in interface boards. See optional accessories.
  • Built-in line and motor fuseholders (both fuses supplied).
Application Information
  • Rated for continuous operation in 50 C ambient with no additional heat sink.
  • Designed to be mounted in separate enclosure supplied by user.
  • Drives Bodine 130 Volt permanent magnet DC motors.
  • Drives 90 Volt 'SCR duty' and 130 Volt 'PWM duty' permanent magnet DC motors made by other manufacturers.
Optional Accessories
  • Analog interface board model 0888.
  • Digital Interface Board model 0889.
  • Electronic Direction and Braking Board model 0890.
  • Local/Remote Switch Kit model 0893.
Model numbers that begin with an 'N' require lead time and minimum order quantities.
Filtered SCR DC, Chassis, 50/60 Hz, Basic Speed Control
1/17 115 0-130 FPM-0810C 0810
1/6 115 0-130 FPM-0830C 0830
1/3 115 0-130 FPM-0850C 0850

MC Supply Co., Inc.    |    Contact us at:   |  Toll Free: (800) 784-4660 
Website by