Filtered PWM DC Basic Speed Control (open chassis)

Filtered PWM DC Basic Speed Control (open chassis)
Standard Features
  • Operates off 115 Volt AC line, 50/60 Hz.
  • Filtered DC output for cooler motor operation, longer brush life, lower audible noise, and wider speed range.
  • Back EMF feedback maintains better than 2% speed regulation.
  • Dip switches to easily calibrate control for different motor sizes.
  • Two diagnostic LEDs indicate when power is on and when current output is at limit set by TORQ pot.
  • Five on-board user-adjustable pots for torque limit, minimum speed limit, maximum speed limit, acceleration time, and speed regulation.
  • Speed can be adjusted manually using a remote 10k speed pot (included with control).
  • Connections for optional user-supplied inhibit switch.
Application Information
  • Rated for continuous operation in 40 C ambient with no additional heat sink.
  • Drives Bodine 130 Volt permanent magnet DC motors.
  • Drives 90 Volt 'SCR rated' and 130 Volt 'PWM rated' PM DC motors made by other manufacturers.
  • Connections made to models 0780 and 0781 with 0.25' quick connect tabs. Seven mating terminals supplied with control. Connections made to models 0783 and 0784 with pluggable terminal block (supplied with control).
Optional Accessories
  • Analog interface board and isolation module model 3984.
Models
Model numbers that begin with an 'N' require lead time and minimum order quantities.
Model Number
Rating
Hp
Input
Volts
(AC)
Output
Volts
(DC)
Product
Type
1/4 inch
QC tab
Connection
Terminal
block
Connection
Filtered PWM DC, Chassis, 50/60 Hz, Basic Speed Control
1/6 115 0-130 WPM-2109C 0780 0783
7/16 115 0-130 WPM-2137C 0781 0784

MC Supply Co., Inc.    |    Contact us at: Info@MCSupplyco.com   |  Toll Free: (800) 784-4660 
Website by
TrueZeal.com
.net