Filtered SCR DC Remote Speed Control

Filtered SCR DC Remote Speed Control
Standard Features
  • Operates off 115 Volt AC line, 50/60 Hz.
  • Filtered DC output for cooler motor operation, longer brush life, lower audible noise, and wider speed range.
  • Dip switches to easily calibrate control for different motor sizes.
  • Line voltage and temperature compensation minimizes speed drift.
  • NEMA 12 enclosure for environmental protection.
  • Trim pots on PC board to adjust torque limit, minimum speed limit, maximum speed limit, acceleration time, and speed regulation.
  • Speed can be adjusted manually using speed pot mounted on enclosure.
  • Terminal block inside enclosure for quick line and motor connection.
  • Back EMF feedback maintains better than 2% speed regulation.
  • Fuse holders for line and motor inside enclosure (both fuses supplied).
Application Information
  • Rated for continuous operation in 40 ambient with no additional heat sink.
  • Drives Bodine 130V Permanent Magnet DC Motors.
  • Drives 90V 'SCR duty' and 130V 'PWM duty' permanent magnet DC motors made by other manufacturers.
Optional Accessories
  • IP44 sealing kit model 0895 for protection against splashing water.
Models
Model numbers that begin with an 'N' require lead time and minimum order quantities.
Rating
Hp
Input
Volts
(AC)
Output
Volts
(DC)
Remote
Signal
Product
Type
Model
Number
Filtered SCR DC, Nema 12, 50/60 Hz, Remote Speed Control
1/17 115 0-130 Analog FPM-0816E 0816
1/6 115 0-130 Analog FPM-0836E 0836
1/3 115 0-130 Analog FPM-0856E 0856
1/17 115 0-130 Digital FPM-0817E N0817
1/6 115 0-130 Digital FPM-0837E N0837
1/3 115 0-130 Digital FPM-0857E N0857


MC Supply Co., Inc.    |    Contact us at: Info@MCSupplyco.com   |  Toll Free: (800) 784-4660 
Website by
TrueZeal.com
.net