42A-GB Series DC Right Angle Gearmotor

42A-GB Series DC Right Angle Gearmotor
Standard Features
  • 42A Motor provides high starting torque, adjustable speed, and predictable performance under a range of operating conditions.
  • Unvented gearhousing.
  • Industrial lip type seals on motor and output shafts.
  • Ball bearing on output shaft for increased radial load capacity and long life.
  • Permanently lubricated gearing utilizing oil for long life.
  • Hardened helical output gearing for quietness and high output torque.
  • Bronze primary worm gear for high shock load capability.
  • Hardened and ground worm hobbed on the motor shaft for high strength and long life.
Application Information
  • Performance ratings of 130V models are based on use with filtered controls.
  • Mounting is via four tapped holes in the face of the gearhead.
Optional Accessories
  • Encoder model 0941.
  • Brake model 0997.
  • IP-44 achieved with terminal box model 0984 or 1984.
  • IP-44 achieved with boot kit model 0978.
Matching Controls
  • We stock a full line of speed controls for our PMDC motors.
Custom Shaft Configurations
Can be special-ordered with a hallow shaft configuration.

Models
Model numbers that begin with an 'N' require lead time and minimum order quantities.
Model Number
24 Volt Winding 130 Volt Winding
Speed
Rpm
Rated
Torque
(lb-in)
Motor
Hp
Gear
Ratio
Product
Type
Accessory
Shaft
No
Accessory
Shaft
Accessory
Shaft
No
Accessory
Shaft
8.6 380 1/4 280 42A5BEPM-GB N4866 N4766 N4466 4066
13 375 1/4 190 42A5BEPM-GB N4864 N4764 N4464 4064
21 290 1/4 120 42A5BEPM-GB N4862 N4762 N4462 4062
42 213 1/4 60 42A5BEPM-GB N4860 N4760 N4460 4060
'F' See accessory ready mounting dimensions

MC Supply Co., Inc.    |    Contact us at: Info@MCSupplyco.com   |  Toll Free: (800) 784-4660 
Website by
TrueZeal.com
.net