QUICK SELECTION CHARTS

IP-44 Mini BF2 Series Rt-angle Shaft Mount

Rt-angle, Mini BF2 Gearing: Featuring the same all hardened steel Hypoid / Helical combination as the BH type. This hollow bore design allows the elimination of chain drives and couplings to save space and reduce machine maintenance. Bearings: Premium ball bearings provide efficient torque transfer and good overhung load capacity. Lubricant: High-grade synthetic grease is factory filled to proper level. Shaft seals: Quality NBR rubber, spring set lip type seals provide good wear resistance over a wide temperature range. Housing seals: Machine slip fit 'O' rings are used. Leaky compressed gaskets are not used! Mounting: Any angle, any direction, full warranty! No breather or oil plugs are required. Housing: Precision die cast aluminum, coated using an electrocoat process for superior resistance to industrial environments. Third Party: All standard voltages are UL, Cul (CSA), and CE marked.

Mini BH Gearing: 100% Hardened steel Hypoid/Helical gearing Hypoid gearing is up to 80% more efficient than competitive worm gears. The Brother all steel Hypoid/Helical combination has much better wear properties than softer bronze worm gearing. Brother Hypoid gearmotors last longer! Hypoid gearing runs cooler than worm gears.

BF2 Shaft Mount Right-angle Mini Series Torque Table (in-lb)

Ratio		RPM	1/50 Hp		1/30 Hp		1/20 Hp		1/15 Hp		1/10 Hp
X:1	Code		Frame	Torque	Frame	Torque	Frame	Torque	Frame	Torque	Frame	Torque
10	10	180	12	6	12	10	15	16	15	25	15	37
15	15	120		9		14		23		37		55
20	20	90		12		19		31		49		74
25	25	72		14		24		39		61		92
30	30	60		17		29		47		74		110
40	40	45		23		39		62		98		147
50	50	36		29		48		78		123		184
60	60	30		35		58		94		147		221
80	80	22.5		44		73		119		186		279
100	100	18		55		91		148		233		349
120	120	15		66		110		178		279		419
160	160	11.2		88		146		237		373		477
200	200	9		110		183		296		466		477
240	240	7.5		132		220		356		477		477

Part Number Building Charts


IP-44 BF2 Rt-Angle Mini Part Numbers

BF2	S	M	15	030	T	G	2	C
Type	Mounting	Motor	Frame	Ratio Code	Phase	Hp	Voltage	Connection
Rt-angle	S: Hollow Bore F: Solid Shaft	M: Motor B: Brakemotor	12 15	See Tables	T: 3 Ph S: 1 Ph	1/50: C 1/30: D 1/20: E 1/15: F 1/10: G 1/6: J	Single Phase 1: 115V 5: 220V 6: 230V 7: Special OEM Three Phase 2: 208/230V 3: 460V 8:Special OEM	C: Plastic Box A: AL Box N: Lead wires
1. Frame, Gear Ratio Code, and Horsepower must match in the ratings tables. 2. The Phase code (T or S) must match the Voltage code.

Copyright © 2004 Brother International Corporation. All Rights Reserved.