Features • Economical, space saving • Pre-configured 'dumb' terminal • IP66 when mounted with gasket (supplied) • Easy to read back-lit LCD display • 4 line 20 character display • RS485 serial link to control • Full numeric key pad with tactile response • 4 function keys u Up-Down, Left-Right keys • Input Power: 12-24 VDC 300mA • Subroutines for common tasks available • Includes pre-wired interface cable (4.6 ft., 1.4m)

The Following is a List of Available Subroutines To Make it Easier to Write a Program • Jog Routines • Define Statements for Command Settings • Routine to Check Validity of Data Entered (GETVAL) • 'Edit' Routine • 'Menu' Routine

The Elterm 24 is an economical Operator Interface Terminal which is pre-configured for use with Superior Electric Warpdriveͺ Series Step Motor Controls, TD Series Servo Controls and MX2000 Multi-axis Controls. The easy to read back-lit LCD display and 24 tactile keys make the Elterm 24 user friendly. A variety of subroutines are available for use in programming the associated controls to help you during startup.

Elterm 24 Dimensions and Installation Guidelines
The terminal is mounted by inserting it into a panel cutout using the supplied mounting brackets and gasket to keep it in place.

Specifications
Dimensions: in. (mm)	8.58W x 5.04H x .75D ( 213W x 128H x 20D)
Weight: lbs (kg)	2.2 (1)
Input Voltage:	12-24 VDC
Input Current:	300mA
Operating Temperature:	-5 to 50°C (23 to 122°F)
Humidity:	<70% relative

When selecting a mounting location, it is important to leave at least two inches (51mm) of space around the top, bottom and sides of the unit to allow proper airflow for cooling. Refer to cutout diagram below. It is also important to keep the terminal away from obvious sources of electrical noise. If possible, locate it in its own metal enclosure to shield it and its wiring from electrical noise sources. If this cannot be done, keep it at least three feet from any noise sources.

Optional Power Supply
The 24VDC switching power supply can be mounted using a standard DIN rail, 1.39' (35.3mm) wide, or panel mounted using the mounting holes provided. The following diagrams provide overall dimensions and mounting hole layout.

Optional Power Supply (part # 227928-001)
Input:	85 - 264 VAC, 47 to 63 Hz
Output:	24 VDC, 300mA
Operator Indicator:	LED, DIN Rail or Panel Mount CE, CUL, UL, TUV

                                       INSTALLATION
                                                  and
                                         OPERATING
                                       INSTRUCTIONS
                                               for the
                                  REMOTE OPERATOR
                                              PANEL

                                                  Click here to download the 24 pg. pdf file.