|
|
Features
• Full Coordinated motion control including linear interpolation of up to 8 axes, circular interpola-tion and polynomial splining among any two axes.
• Programmable using WIN-DOWS based BASIC-like cod-ing software (included) or one of the optional software utilities, Motion Workbench or CAD-to-Motion
• Full math functions including Trig, Logs, and Square roots
• Subroutine capability (up to 16 nested levels)
• Multi-tasking of up to 7 concur-rent tasks
• Up to 8 axes of stepper pulse and direction outputs, with Boost & Reduce
• Up to 8 axes of Encoder inputs and analog I/O
• Optical isolation, with built-in 24 Vdc 0.75 amp power supply for I/O power |
• Upto 352 I/O points available using optional boards
• Easy to connect removable screw clamp terminations
• Flash Memory enhances ease of programming and firmware updates
• 2 serial ports, operating at up to 38 Kbaud
• Flexible 90-265 Vac 50/60 hertz input including built in line filter with MOV.
• MX-2 and MX-6 Units UL Rec-ognized |
|
General |
|
|
|
Processor |
Texas Instruments TMS 320C31, 32 bit, Floating Point, Digital Signal Processor |
|
Speed |
3 Mhz |
|
|
Flash EPROM |
4 Mbit (512K x 8 bit), 2 Mbit (256K x 8 bit) available for user programs |
|
RAM |
4 Mbit (128K x 32 bit), zero wait state, volatile |
|
Multi-Tasking |
Up to 7 concurrent tasks |
|
|
Physical Characteristics |
|
|
MX2000-2 |
Size (Inches) |
5.34 wide x 7.48 deep x 10.63 high |
|
|
Size (mm) |
136 wide x 190 deep x 270 high |
|
|
Weight |
8.25 Lbs (3.75 Kg) |
|
MX2000-6 |
Size (Inches) |
9.34W x 10.63H x 7.48D |
|
|
Size (mm) |
237.3W x 270H x 190D |
|
|
Weight |
11.0 lbs (5.0 kg) |
|
MX2000-8 |
Size (Inches) |
19.0W x 10.63H x 7.54D |
|
|
Size (mm) |
482.6W x 270H x 191.6D |
|
|
Weight |
12.0 lbs (5.45 kg) |
|
Input Power |
|
|
MX2000-2, -6 |
Power requirement |
90-265 VAC, 50/60 Hertz |
|
|
Current |
0.5 Ampere at 115 VAC |
|
|
Fuse |
2A (normal blow), 250 VAC, 3AG type,
(2 required) |
|
MX2000-8 |
Power requirement |
90 - 132 VAC or 175 - 264 VAC, 50/60 Hz. |
|
|
Current |
3A at 115 VAC |
|
|
Fuse |
3A (slow blow), 250 VAC |
|
Analog Output |
|
|
Output Range |
-10 Vdc to + 10 Vdc |
|
|
Output Loading |
5 milliamps maximum (2 Kohm) |
|
|
Resolution |
12 bits |
|
|
Accuracy |
Zero Output Error |
±0.03 Vdc |
|
|
Full Scale Output Error |
±0.11 Vdc |
|
Axis Inputs |
|
|
Sink Input |
On-State Voltage |
0-3 Vdc |
|
|
On-State Current |
10.5 mA with Vin=0 |
|
|
Off-State Voltage |
24 Vdc |
|
Source Input |
On-State Voltage |
12-24 Vdc |
|
|
On-State Current |
10.5 mA with Vin=24Vdc |
|
|
Off-State Voltage |
0-3 Vdc |
|
Analog Inputs |
Resolution |
12 bits |
|
|
Sample Rate |
1950 samples/sec. |
|
|
Voltage Range (IN+ to IN-) |
-10 to +10 Vdc |
|
|
Input Impedance (IN+/IN- to AGND) |
20 Kohm |
MX2000-2 (MX-2)
Dimensions
MX2000-6 (MX-6)
Dimensions
MX2000-8 (MX-8)
Dimensions
The MX2000-8 (MX-8) can be mounted as shown in the above diagram or it can be mounted in a standard 19 inch rack.
To mount the MX-8 in a 19 inch rack simply remove the side mounting panels, one at a time, and rotate them 180°,
then reattach them to the unit. The mounting hole pattern is compatible with a standard 19 inch rack in this configuration.
SLO-SYN MODEL MX2000
PROGRAMMABLE MULTI-AXIS
MOTION CONTROLLER
(with VERSION 4.0 SOFTWARE)
INSTALLATION
AND
OPERATION
MANUAL
Click here to download the 346 pg. pdf file.
|
